Siemens Simatic MP 377 Operating Instructions Manual page 4

Preface
Style conventions
The following text notation will facilitate reading this manual:
Notation
"Add screen"
"File > Edit"
<F1>, <Alt+P>
Please observe notes labeled as follows:
Note
A note contains important information about the product and its use or a specific section of
the manual to which you should pay particular attention.
Naming conventions
The following naming conventions apply:
Term
Control cabinet
Plant
Illustrations in this manual
This manual contains illustrations of the described devices. The illustrations may differ from
devices actually delivered.
Trademarks
The following designations marked with the symbol ® are registered trademarks of
Siemens AG:
● HMI
● SIMATIC
● WinCC
4
®
®
®
Scope
Terminology that appears in the user interface, for example
•
dialog names, tabs, buttons, menu commands
Required input, for example, limits, tag values.
•
Path information
•
Operational sequences, for example, menu commands, shortcut
menu commands.
Keyboard operation
This also applies to
Mounting cabinet
•
Enclosure
•
Machining centers
•
Machines
•
MP 377 15" Touch daylight readable (WinCC flexible)
Operating Instructions (Compact), 04/2009, A5E02532357-01
Console
•
Switchboard
•
Systems
•