Removing The Oven Door & The Inner Glass - KitchenAid KAC-24 Technical Education

REMOVING THE OVEN DOOR & THE INNER GLASS
WARNING
Electrical Shock Hazard
Disconnect power before servicing.
Replace all panels before operating.
Failure to do so could result in death or
electrical shock.
CAUTION: When you work on the microwave
oven, be careful when handling the sheet metal
parts. Sharp edges may be present, and you
can cut yourself if you are not careful.
1. Disconnect the electrical power to the
microwave oven.
2. Remove the microwave oven from the
oven cabinet (see pages 2-8 & 2-9 for the
procedure).
3. Remove the left and right side panels from
the microwave (see step 2b on page 2-10
for the procedure).
NOTE: The inner door glass cannot be re-
placed separately. The oven door and inner
glass must be replaced as an assembly.
4. Remove the T-10 torx shoulder screws
from the door stops (1 on each side).
T-10 Torx
Shoulder Screw
T-15 Torx Screw
5. Remove the T-15 torx screws from the
sides of the door brackets (1 on each
side).
6. Remove the two bottom screws from the
door panel and remove the panel.
Screw
Bottom Of Unit
2-28
Right Door Stop
Right Door Bracket
Door Panel Screw