KitchenAid KAC-24 Technical Education page 25

4. To remove the primary and monitor
interlock switches:
a) Pull the microwave oven out of the
oven cabinet approximately 6˝ so you
can access the interlock switches (see
pages 2-8 & 2-9 for the procedure).
b) Open the microwave oven door.
c) Remove the two T-10 torx flat-head
screws from the primary and monitor
switch bracket.
Primary & Monitor
Switch Bracket
Screws
d) Disconnect the wires from the primary
and monitor switch terminals. A switch
is mounted on both sides of the bracket.
Turn Switch
Assembly
Around
e) Unclip and remove the primary and
monitor switches from the bracket.
NOTE: Be careful when removing the
switches. The clips are very fragile and
break easily.
2-11
Primary
Switch
Red & Blk
Wires (Com)
Gry & Blk
Wires (N.O.)
2 Brn
Wires (N.C.)
Monitor
Switch
2 Gry
Wires (N.C.)
Brn
Wire (N.O.)
Wht, Gry, &
Wht Wires
(Com)