d) Remove the T-10 torx screws from the
fan motor and remove the motor from
the housing.
Fan Motor Torx Screws
The microwave oven component described on
this page is shown below.
10. To remove the air vent solenoid:
a) Disconnect the wires from the termi-
nals.
b) Remove the T-10 torx screw.
c) Unclip the actuator from the solenoid
shaft.
Wires
2-19
Air Vent Solenoid
Actuator
Torx
Screw
Air Vent
Solenoid