Rf Statistics - Motorola WiNG 5.5 Reference Manual

13.2.8.2 RF Statistics

To view the RF Domain radio statistics:
1. Select the Statistics
2. Select a RF Domain from under the
3. Expand Radios
The RF Statistics
Radio
Signal
Noise
SNR
Tx Physical Layer
Rate
Rx Physical Layer
Rate
Avg Retry Number
Error Rate
RF Quality Index
menu from the Web UI.
System
from the RF Domain menu and select
Figure 13-16 RF Domain - Radio RF Statistics screen
screen displays the following:
Displays the name assigned to each listed RF Domain member radio. Each name displays as a
link that can be selected to display radio information in greater detail.
Displays the power of listed RF Domain member radio signals in dBm.
Lists the level of noise (in - X dbm format) reported by each listed RF Domain member access
point.
Displays the signal to noise ratio (SNR) of each listed RF Domain member radio.
Displays the data transmit rate for each RF Domain member radio's physical layer. The rate is
displayed in Mbps.
Displays the data receive rate for each RF Domain member radio's physical layer. The rate is
displayed in Mbps.
Displays the average number of retries for each RF Domain member radio.
Displays the average number of retries per packet. A high number indicates possible network
or hardware problems.
Displays an integer (and performance icon) that indicates the overall RF performance for each
listed radio. The RF quality indices are:
• 0 – 50 (Poor)
• 50 – 75 (Medium)
• 75 – 100 (Good)
node on the top, left-hand side, of the screen.
RF Statistics.
Statistics 13 - 27