Table of Contents
Advertisement
5 - 318 WiNG 5.5 Access Point System Reference Guide
18. Select the
Service Watchdog
running and capable of effectively interoperating. The Service Watchdog is enabled by default.
19. Select
OK
to save the changes and overrides made to the profile maintenance Heartbeat tab. Select
last saved configuration.
5.4.5.10 Overriding Mesh Point Configuration
Device Overrides
The access point can be configured to be a part of a meshed network. A mesh network is one where each node in the network
is be able to communicate with other nodes in the network and where the node can maintain more than one path to its peers.
Mesh network provides robust, reliable and redundant connectivity to all the members of the network. When one of the
participant node in a mesh network becomes unavailable, the other nodes in the network are still able to communicate with
each other either directly or through intermediate nodes.
Mesh Point is the name given to a device that is a part of a meshed network.
Use the Mesh Point screen to configure or override the parameters that set how this device behaves as a part of the mesh
network.
To override Mesh Point configuration:
1. Select
Devices
2. Select
Device Overrides
3. Select a target device from the device browser in the lower, left-hand, side of the UI.
4. Select
Mesh Point.
Figure 5-206 Device Overrides - Management Heartbeat screen
option to implement heartbeat messages to ensure other associated devices are up and
from the Configuration menu.
to expand its menu items
Reset
to revert to the
Hide quick links:
Advertisement
Table of Contents
