Balancer Weight - Yamaha XC200T Service Manual

ENG ID]
INSPECTION AND REPAIR
-- BALANCER WEIGHT
1. Remow_:
_' a galancer weight gear component parts @
/
From the baiancer weight (_2"}_
2. Inspect:
oWeight gear (I}
_ oBuffer boss
eSpdngs _33"}
,j_} _Dowe! pins {_8. _)
o Holding plate @
, ..- Damage/Wear/Fatigue-_* Replace.
,,/ i
U
3. Install:
®Dowel pins ({!.}
eSprings (_8_}
_h x To the buffer boss {8} ....
NOTE:
Place the pins as iJtustrated position,
4, Install °
oBuffer boss assembly _i}
To the weight gear _2}
NOTE:
Align tile match mark {$}_on the weight gear with
the match mark _} on the buffer boss_
5. Install:
(_--- ®Holding plate _1_
_Weight gear assembly (_2}_
To the balancer weight.
NOTE:
Align the hole {3} on the holding plate and buffer
boss with the dowel pin (_} on the balancer
weight°
(4.7
3-43