Conference Calls - Polycom VVX 1500 Series Quick Start Manual

Conference Calls

Setting up Conference Calls
You can set up a conference call with two other people. During
a conference call, you can send and receive video with only one
conference participant. If you want, you can switch the person
with whom you exchange video.
To set up a conference:
• Call the first party
After the first party answers, tap the Conference
•
soft key. The active call is placed on hold
• Place a call to the second party.
• When the second party answers, tap the
Conference soft key. All parties are joined in the
conference.
You can do the following:
• To place the conference on hold, tap the Hold soft
key. To resume the call, tap the Resume soft key.
• To end the conference, but keep the other participants
connected, tap the End Call soft key
• To end the conference and place all participants on
hold, tap the Split soft key
• To start and stop the transmission of near-site video,
tap the Video soft key, and then tap the Stop Video
soft key. (You will still receive video.) To start the
transmission of near-site video again, tap the Start
Video soft key.
Quickstart Guide | Polycom VVX 1500 Series 7