Mtu Vlan; Port Trunking - Planet FGSW-4840S User Manual

User's Manual of FGSW-4840S

3.7.3 MTU VLAN

This page, which is designed to configure the uplink port, displays when the Switch is in MTU VLAN mode. The screen in
Figure 3-27 appears.
Figure 3-27 MTU VLAN Setting screen
On setting the MTU VLAN mode, you should select the uplink port to complete the MTU VLAN setting. The uplink ports will
buildup several VLANs with each of the other ports. Each VLAN contains two ports, the uplink port and one of the other
ports in the switch, so the uplink port can communicate with any other ports but other ports can't communicate with each
other.

3.8 Port Trunking

The System setting menus include the tree sub-menus:
Port Trunking
This function provides to cascade two Switch devices with a double bandwidth. There are eight trunk groups and each
group provides four selections for fixed trunk port setting.
The trunking screen in Figure 3-28 appears.
Figure 3-28 Trunking Setting screen
25