Basic Operations; Opening And Closing The Lcd Panel; Setting The Automatic Open Function - Pioneer AVH-X7500BT Owner's Manual

Common operations
Notes
• You cannot operate this function while driving.
• Different settings can be stored for each video source.
• When a video is viewed in a wide screen mode that does not match its original aspect ratio,
it may appear different.
• Remember that using the wide mode feature of this system for commercial or public viewing
purposes may constitute an infringement on the author's rights protected by the Copyright
Law.
• The video image will appear coarser when viewed in Zoom mode.
• This function is enabled for playback on the sources listed below.
– Disc: DVD-V, Video-CD, DivX, MPEG-1, MPEG-2, MPEG-4
– iPod: Video
– AV: A/V data
– AUX: A/V data

Basic operations

Opening and closing the LCD panel

The LCD panel will open or close automatically when the ignition switch is turned on
or off. You can turn off the automatic close/open function.
• Do not close the LCD panel by force with your hands. That will cause a malfunction.
• The automatic close/open function will operate the display as follows.
– When the ignition switch is turned OFF while the LCD panel is opened, the LCD
panel will close after six seconds.
– When the ignition switch is turned ON again (or turned to ACC), the LCD panel will
open automatically.
– Removing or attaching the front panel will automatically close or open the LCD
panel. (Refer to "Protecting your unit from theft" on page 6.)
• When the ignition switch is turned OFF after the LCD panel has been closed, turning
the ignition switch ON again (or turning it to ACC) will not open the LCD panel. In
this case, press OPEN/CLOSE to open the LCD panel.
• When closing the LCD panel, check to make sure that it has closed completely. If
the LCD panel has stopped halfway, leaving it like this could result in damage.
! CAUTION
Keep hands and fingers clear of the unit when opening, closing, or adjusting the LCD
panel. Be especially cautious of children's hands and fingers.
* Press OPEN/CLOSE to open the LCD panel.
• To close the LCD panel, press OPEN/CLOSE again.

Setting the automatic open function

To prevent the display from hitting the shift lever of an automatic vehicle when it is in
the P (park) position, or when you do not wish the display to open/close automatically,
you can set the automatic open function to manual mode.
1. Press the home button to switch to the home display.
2. Touch the system key to open the system menu.
3. Touch Auto Flap to select whether to open/close the display automatically or
manually.
Each time you touch Auto Flap the setting switches between:
• On – The LCD panel will open or close automatically when the ignition switch is
turned on or off.
• Off – You have to press OPEN/CLOSE to open/close the LCD panel.
11