Kenwood KRC-235 Nstruction Manual page 7

Adjustment Item Display Range
I
Bass level
Treble level
Balance
Fader
" BAS" -4-4
"TR E"
-4-4
"BL" L15- R45
"FD" R15--15
5 Exit Audio Control mode
Press the [A.ADJl button.
Switching the displayed information.
Press the [CLKI button.
Each time the button is pressed it switches between clock
display and current source.
During clock display the clock indicator is ON.
1
Select the clock display
Press the [CLKI button.
2 Enter clock adjustment mode
Press the ICLKI button for at least 2 seconds.
The clock display
blinks.
3 Adjust the hours
Press the IFMI or [AMI button.
Adjust the minutes
Press the [WI or [WI button.
4 Exit clock adjustment mode
Press the [CLKI button.
The faceplate of the unit can be detached and taken with you,
helping to deter theft.
Removing the Faceplate
Press the Release button.
The faceplate is unlocked, allowing you to detach it.
A !
l
The
faceplate
is
a
precision piece of equipment
and can
be
damaged by shocks or jolts. For that reason, keep the faceplate in
its special storage case while detached.
l
Do not expose the faceplate or its storage case to direct sunlight
or excessive heat or humidity. Also avoid places with too much
dust or the possibility of water splashing.
Reattaching the Faceplate
1
Align the projections on the unit with the grooves on the
faceplate.
2 Push the faceplate in until it clicks.
The faceplate is locked in place, allowing you to use the unit.