Kenwood KRC-235 Nstruction Manual page 6

hacreasing Volume
Press the [A] button.
Decreasing Volume
Press the [VI button.
Turning the volume down quickly.
Press the [ATT] button.
Each time the button is pressed the Attenuator turns ON or OFF.
When it's ON, the "ATT" indicator blinks.
Compensating for low and high tones during low volume.
Press the [LOUD] button for at least 1 second.
Each time the button is pressed for at least 1 second the
Loudness turns ON or OFF.
When it's ON, "LOUD" indicator is ON.
You can recall the best sound setting preset for different types of
the music.
1
Select the source to set
Press the [SRCI button.
=+
2 Enter Control mode
Press the [AUDI button.
3 Select the Sound type
Press the [#II -
I#51
button.
Press button
Sound setting Display
I#1 1 Flat
"EC-1 'I
I#21
Rock
'I
EC-7
L#31 Pops/ Top 40
"EC-3"
I#41 Jazz
"EC-4"
w51 Easy
"EC-5"
Q
I:=* When the ec4(Sound Coordinate1 setting is changed, the Bass and
__-
Treble set in audio control repiace the ec4Eound Coordinate) values.
4 Exit Control mode
Press the [AUDI button.
1
Select the source for adjustment
Press the [SRCI button.
2 Enter Audio Control mode
Press the [A.ADJl button for at least 1 second.
3 Select the Audio item for adjustment
Press the [FM] or [AM] button.
Each time the button is pressed the items that can be adjusted
switch as shown below.
4 Adjust the Audio item
Press the [HI or [WI button.
I
-6-