Table of Contents
Advertisement
15
Lubricating the Front Casters
Interval: Daily
16
Rubber Discharge Guard Inspection
Interval: The rubber discharge guards should be inspected daily.
Inspect the rear rubber guard (A, Figure 17) and the front rubber
guard (B) for wear or damage.
17
Damaged rubber guards must be replaced to prevent objects
from being thrown into the operator's or bystander's area.
Check / Fill Transmission Oil
Oil Type: 20W-50 conventional detergent motor oil.
1. Check the oil level when the unit is cold. Locate the
transmission oil reservoirs (A, Figure 18) located on the
handle bar assembly. The oil should be up to the "FULL
COLD" mark (B). If the oil is below this level, proceed to step
2.
18
2. Before removing the reservoir caps, make sure the area
around the reservoir cap and fill neck of the reservoir is free
of dust, dirt, or other debris. Remove the reservoir cap.
3. Add oil up to the "FULL COLD" mark (B).
4. Reinstall the reservoir caps.
19
Advertisement
Table of Contents
