Security Features; Emergency Access - Honeywell 2202 User Manual

SECURITY FEATURES

SECURITY LOCKOUT PERIOD:
If an incorrect code is entered, the LED's will blink and a special two-tone
alarm will sound. You should then re-enter the proper code. If an incorrect
code is entered 4 times, the safe will enter a security lockout period of about
5 minutes. During this time, you will not be able to enter the safe.

EMERGENCY ACCESS

OPEN SAFE WITH EMERGENCY ACCESS KEY
If you have forgotten your personal access code or the electronic lock is not
functioning properly, you can use the Emergency Override Key to gain access.
1. The emergency override lock is
located behind the batteries under
the round digital keypad housing.
To gain access, lift the dust cover,
rotate the housing to the left
(counterclockwise) and carefully
pull it forward and down.
2. Temporarily remove the batteries
and Insert the emergency override
key into the lock (K) and turn it
counterclockwise to the left.
3. Rotate the handle upwards and pull
the door open.
4. Remove the key and replace the
4-AA batteries. Reposition the
digital keypad housing into the
locking holes and rotate the
housing to the right (clockwise).
5. Follow Step 3 (Setting New Personal Entry Code) to re-set your code and
test as instructed.
1.
2.
3.
4.
5