Table of Contents
Advertisement
Connecting your Monitor
Be sure to read the
'Safety Information' at
the front of this User Guide
before carrying out this
procedure.
1.
Turn off your PC and all attached devices.
2.
With the monitor standing vertically, remove
the cable covers at the back:
•
remove cable cover 1 by hooking your
finger at A and sliding the cover off
smoothly.
•
remove cable cover 2 by pressing both
sides of the cover and pulling out.
3.
Place the screen towards the edge of a flat
surface with the stand hanging slightly off the
edge. Connect the monitor cable and tighten the screws.
5.
Thread the cables through the metal fitting - the AC adapter cable
through A and the monitor cable through B as shown below.
6.
You can release the cables from each of the three notches by removing
the chips as shown above.
4
4.Next connect the AC adapter.
Advertisement
Table of Contents
