Default Preset Timing - IBM 9514-BXX User's Setup Manual

Default Preset Timing

The monitor retains the following timing parameters for 'Clock,' 'Hsync,'
'Vsync,' and Displayable Dots' as default values. The monitor automatically
selects the corresponding values to the video signal from your PC.
Screen
Resolution
(Horiz. × Vert.)
640 × 400
640 × 480
720 × 400
640 × 480
640 × 480
800 × 600
800 × 600
800 × 600
800 × 600
1024 × 768
1024 × 768
1024 × 768
1024 × 768
Note: The Hsync and Vsync frequencies in this table are not the only ones to
be displayed. Refer to the table on page 21 for the supported frequencies.
The parameters that you set through AUTO SETUP on the main menu or the
manual-adjust menu are saved in the monitor memory. Up to 25 settings can
be stored.
Clock Hsync
(MHz) (KHz)
25.18 31.47
25.18 31.47
28.32 31.47
31.50 37.86
31.50 37.50
36.00 35.16
40.00 37.88
50.00 48.08
49.50 46.88
65.00 48.36
75.00 56.48
78.75 60.02
80.00 58.14
22
Timing
Displayable
Vsync
(Hz) (Horiz. ×
70.09 800 × 449
59.94 800 × 525
70.09 900 × 449
72.81 832 × 520
75.00 840 × 500
56.25 1024 × 625
60.32 1056 × 628
72.19 1040 × 666
75.00 1056 × 625
60.00 1344 × 806
70.07 1328 × 806
75.03 1312 × 800
72.00 1376 × 808
Dots
Vert.)