Lifescan OneTouch Ultra Owner's Booklet page 58

MESSAGE WHAT IT MEANS
3. The sample was
improperly applied.
Error message that indicates
that the meter has detected a
problem with the test strip.
Possible causes are test strip
damage or an incompletely
filled confirmation window.
The sign appears on
É
the display with the unit of
measure. The power is get-
ting low. You can complete
about 50 more tests from
the time this symbol first
appears.
The sign appears on
É
the display by itself. The
power is too low to perform
a test.
ACTION
3. If you applied the blood
incorrectly, review
pages 27-28 on blood
application and repeat
the test with a new test
strip. If the error mes-
sage appears again,
contact LifeScan
Customer Services at
1 800 227-8862.
Repeat the test with a
new test strip. Refer to
pages 27-28 for informa-
tion on sample applica-
tion.
Test results will still be
accurate, but replace the
battery as soon as possible.
Replace the battery at
once. The meter will
not operate.
53