Display Messages And Problem-Solving Guide - Lifescan OneTouch Ultra Owner's Booklet

Display Messages and
Problem-Solving Guide
Following is a summary of all display messages. These messages help to
identify certain problems but do not appear in all cases when a problem
has occurred. Improper use may cause an inaccurate result without pro-
ducing an error message or a symbol. In the event of a problem, refer to
the information under ACTION. Assistance is available from LifeScan
Customer Services 24 hours a day, seven days a week.
MESSAGE
46
WHAT IT MEANS
Display check. Appears
whenever the meter is turned
on. To verify that all segments
are present on the display,
press and hold the C button.
Compare the meter display
with page 10.
1. This message appears
immediately after the
display check if your meter
has not been coded.
2. If this message appears at
any time after the first time
the meter was coded, the
code number has been lost.
The test results stored in the
meter memory may be out
of order.
ACTION
If segments are missing,
contact LifeScan Customer
Services for further action.
Missing segments can lead
to misinterpretation of test
results.
1. See "Coding the Meter,"
pages 10–12.
2. Do not rely on the 14-
and 30-day averages. It
is important to call
LifeScan Customer
Services for assistance.