Olivetti d-COPIA 3500MF Operation Manual page 294

Removing the USB Memory
There is a way to remove the USB memory safely.
Use the procedure below to remove the USB memory.
Status
Scanner
Ready.
Printer
Ready.
Removable Memory
Not connected.
Format Remove
FAX Port 1
Dialing...
Line Off Manual RX
FAX Log
Printing Jobs Sending Jobs
Status
Canceling FAX Communication
Cancel fax communication.
Use the procedure below to cancel the fax communication.
Status
Scanner
Ready.
Printer
Ready.
Removable Memory
Not connected.
Format Remove
FAX Port 1
Dialing...
Line Off Manual RX
FAX Log
Printing Jobs Sending Jobs
Status
Hard Disk
Overwriting...
FAX Port 2
Receiving...
Line Off
i-FAX Check New FAX
Storing Jobs Device/
Paper/Supplies
Communication
10/10/2010 10:10
Hard Disk
Overwriting...
FAX Port 2
Receiving...
Line Off
i-FAX Check New FAX
Storing Jobs Device/
Paper/Supplies
Communication
10/10/2010 10:10
1
Press the Status/Job Cancel key.
2
Press [Device/Communication] > [Remove] in
Removable Memory.
3
When Removable memory can be safely removed.
is displayed, remove the USB memory.
1
Press the Status/Job Cancel key.
2
Press [Device/Communication] > [Line Off] in FAX
Port 1 or FAX Port 2.
3
Press [Yes] in the confirmation screen. The line is
disconnected, and the fax communication is
canceled.
8-16
Status / Job Cancel