Water Filter - LG LSC27921 series Owner's Manual

WATER FILTER

Before removing or installing water filter:
1. Take out the top shelf and move it to the lowest level.
2. Remove the lamp cover by pressing the tab under
the cover and pulling cover to the front.
3. IMPORTANT: Turn off household water supply.
Removing the water filter:
1. For first-time installation, remove filter substitute cap
(A) by turning it counterclockwise a quarter turn and
pulling it down.
2. For subsequent installation, remove old filter by
slowly turning it to the left a quarter turn and pulling it
down.
USING YOUR REFRIGERATOR
Installing the water filter
Remove red cap from the filter and insert the two
tabs on the filter tip into the two slots in the
refrigerator filter receptacle. You should feel the filter
entering completely. Turn the filter to the right a quarter
turn clockwise to lock it into place. The locked symbol
will be lined up with the indicator arrow.
A
24
After installing water filter:
1. Replace the cover lamp ande shelf to the initial
position.
2. Dispense 2.5 gallons (9.46 liters) of water to purge the
system, depressing and releasing the dispenser button
in cycles of 30 seconds ON and 60 seconds OFF. Open
the refrigerator door and check the shelf area for leaks.
3. After installing filter, turn on household water supply.
To purchase replacement water filters, call
1-877-714-7486 and ask for replacement part
no. 5231JA2002A.