Adjusting Control Settings - LG LSC27921 series Owner's Manual

ICE TYPE
CRUSH
CUBE
ICE PLUS
7
HOLD
3 SECS
MONTH
6
8
Ice Plus
When the ICE PLUS button is pressed, the display
will indicated the selected function has been
activated.
Dispenser light indicator
When the LIGHT / FILTER button is pressed, the
display will indicate the selected function: The
dispenser light is on, this indicator will appear on the
display panel.
6 Door alarm indicator
This indicator shows the current status that the
door-open warning alarm is activated.
7 Water filter status
This indicator shows the current status for the water
filter. See the filter indicator.
Lock status
8
This indicator shows the current status for the control
panel functions is set to LOCK.
DIAGNOSIS (FAILURE DETECTION) FUNCTION
Diagnosis function automatically detects failure during
the normal use of refrigerator.
If you refrigerator fails, do not turn off the power. Instead,
contact a local Authorized service center or call our
support line for assistance. Turning off the appliance will
make it more difficult for the service technician to
determine the problem.
USING YOUR REFRIGERATOR
Dispenser selection
indicator
Shows cubed ice or crushed
ice selection that will be
dispensed when the push
switch is pressed.
Freezer temperature
Indicates the set temperature
of the freezer compartment in
Celsius or Fahrenheit.
Refrigerator temperature
Indicates the set temperature
of the refrigerator
compartment in Celsius or
Fahrenheit.

ADJUSTING CONTROL SETTINGS

Give the refrigerator time to cool down completely
before making final adjustments. It is best to wait 24
hours before doing this. The initial settings mentioned in
CONTROL PANEL FEATURES section should be
correct for normal household refrigerator use. The
controls are set correctly when milk or juice is as cold as
you like and when ice cream is firm.
The refrigerator control functions as the thermostat for
the entire appliance (refrigerator and freezer sections).
The colder the setting,
run to keep the temperature colder. The freezer control
adjusts the cold air flow from the freezer to the
refrigerator. Setting the freezer control to a lower
temperature keeps more cold air in the freezer
compartment to make it colder.
If you need to adjust temperatures in the refrigerator or
freezer, start by adjusting the refrigerator and allow 24
hours for the temperature to stabilize. If it is too warm or
too cold, then adjust the freezer control.
Use the settings listed in the chart below as a guide.
Always remember to wait at least 24 hours between
adjustments.
CONDITION/ REASON :
REFRIGERATOR section too
warm
– Door opened often
– Large amount of food added
– Room temperature very warm
FREEZER section too
warm/ice not made fast enough
– Door opened often
– Large amount of food added
– Very cold room temperature
(Compressor does not cycle
often enough)
– Heavy ice usage
– Air vents blocked by items
REFRIGERATOR section too
cold
– Controls not set correctly for
your conditions
FREEZER section too cold
– Controls not set correctly for
your conditions
19
the longer the compressor will
RECOMMENDED
ADJUSTMENT :
Set the Refrigerator
control one degree
colder; wait 24 hours
for the new setting to
take full effect before
making another
adjustment.
Set the Freezer control
one degree colder;
wait 24 hours for the
new setting to take full
effect before making
another adjustment.
Move items out of
airstream
Set the Refrigerator
control one degree
colder; wait 24 hours
for the new setting to
take full effect before
making another
adjustment.
Set the Freezer control
one degree colder;
wait 24 hours for the
new setting to take full
effect before making
another adjustment.