Door Alignment - LG LSC27921 series Owner's Manual

DOOR ALIGNMENT

Remove the base grille before adjusting the doors.
See BASE GRILLE INSTALLATION for reference.
Two methods of door alignment are available based on
the amount of adjustment needed and installation
requirements.
Type 1
Adjusting tool: Flat blade screwdriver
If the freezer compartment door is lower than the
refrigerator compartment door, level them by inserting a
flat blade screwdriver into the groove of the left leveling
leg and rotating it clockwise.
Left leveling
leg
If the freezer compartment door is higher than the
refrigerator compartment door, level them by inserting a
flat blade screwdriver into the groove of the right leveling
leg and rotating it clockwise.
Height
difference
Height
difference
C C
F F
REFRIGERATOR INSTALLATION
Height
difference
Height
difference
C C
F F
Right leveling leg
Type 2
Adjusting tools: 5/16"
¾" (19 mm) wrench
Adjust the level when the refrigerator door is lower than the
freezer door during the installation of the refrigerator.
Height
difference
Height
difference
C C
F F
Using a ¾" (19 mm) wrench, t urn the keeper nut clockwise
to loosen the keeper nut.
Using a 5/16" (8 mm) wrench, turn the adjustment hinge pin
clockwise or ounterclockwise to level the c
freezer door.
After leveling the door, turn the keeper nut counterclockwise
to tighten.
CAUTION: Do not overtight the door adjustment screw.
The hinge pin can be pulled out. (Adjustable range of
height is a maximum of ½" (1.27 cm)).
AFTER LEVELING THE DOOR HEIGHT
Confirm all legs are in contact with the floor.
12
(8 mm) wrench and
Keeper nut
Wrench
Up
Adjustment
hinge pin
Down
refrigerator and