Handle Removal; Removing And Replacing Refrigerator Doors - LG LSC27921 series Owner's Manual

HANDLE REMOVAL

NOTE: To avoid damaging door surfaces when moving the
refrigerator through narrow openings, it is ALWAYS
recommended to remove the doors as instructed in the
next two pages.
• Loosen the set screws with a 3/32" (2.38 mm) Allen
wrench and remove the handle.
NOTE: If the handle mounting fasteners need to be
tightened or moved, use a
wrench.
Mounting
fasteners
REFRIGERATOR INSTALLATION
¼ " (6.35 mm) Allen
Set screw
Allen Wrench
10
WARNING
Electric Shock Hazard
• Disconnect electrical supply to the refrigerator
before installing. Failure to do so could result in
death or serious injury.
• Do not put hands or feet or other objects into the
air vents, base grille, or bottom of the refrigerator.
You may be injured or receive an electrical shock.
• Be careful when you work with the hinge, base
grille, and stopper. You may be injured.
REMOVING AND REPLACING
REFRIGERATOR DOORS
Before removing the doors, remove the base grille.
See BASE GRILLE INSTALLATION for reference.
To remove the right (refrigerator) door:
(1)
(3)
Type 1
1. Open the door. Remove the top hinge cover screw
(1).
2. Use a flat blade screwdriver to pry back the hooks
(not shown) on the cabinet underside of the cover (2).
Lift up the cover.
3. Rotate the hinge lever (3) clockwise . Lift the top hinge
(4) free of the hinge lever latch (5).
NOTE: Regardless of hinge lever type, removal process is
the same.
4. Lift the door from the lower hinge pin.
5. Place the door, inside facing up, on a nonscratching
surface.
When lifting the hinge free of the latch,
be careful that the door does not fall forward.
(2)
(4)
(5)
(3)
Rivet
(4) (5)
Type 2