Volume List - HP StorageWorks XP24000 User Manual

Table 17 Pair Operation Window Features
Item
Tree

Volume List

Icons
Display Filter button
Previous button
Next button
Preview List
Apply button
Cancel button
Volume List
The Volume List (see
used by SIz, FlashCopy Mirroring, and FlashCopy Mirroring V2. The Volume List displays the
information based on the filter options you select in the Tree (located along the left side of the
window). You can sort the volumes by any of the items displayed as the column header of the
Volume List. You can also filter the volumes by reserve attribute, by pair condition, and by pair
status using the Display Filter dialog box. For information about how to use this dialog box, see
"Configuring the Volume List" (page
54 Using the ShadowImage for Mainframe GUI
Description
Allows you to select a defined CU image or LDEV ID. By selecting a CU image or an
LDEV ID, the corresponding volume or volume pair displays in the Volume List on the
upper right of the Pair Operation window. No volume displays when you select Subsystem
on the top of the Tree. The tree is located on the left of the Pair Operation window.
Displays all available volumes and is located on the upper right of the Pair Operation
window. For details, see
Indicates the status of a volume or pair in the Pair Operation window:
: S-VOL
: T-VOL
: Reserved volume when displayed in the Volume List. Preview item when displayed
in the Preview List.
: An error occurred during operations. (This error icon is displayed in the Preview
List in the Pair Operation window.)
: LDEV when displayed in the Tree. Simplex volume when displayed in the Volume
List.
: CU (displayed in the Tree)
: Root (displayed in the Tree)
Allows you to display the Display Filter dialog box (see
(page 64)) where you can filter the volumes displayed in the Volume List.
Allows you to return to the previous page of the Volume List. This button is selectable
only when the number of volumes defined in the storage system exceeds 1,024 volumes,
which is the maximum number of volumes that can be displayed on one page. It remains
dimmed when the total number of volumes defined in the storage system is less than
1,024 volumes.
Allows you to turn to the next page of the Volume List. This button is selectable only when
the number of volumes defined in the storage system exceeds 1,024 volumes, which is
the maximum number of volumes that can be displayed on one page. It remains dimmed
when the total number of volumes defined in the storage system is less than 1,024
volumes.
Displays the content of the operations (volume/pair information) that have been set or
specified in the Pair Operation window, but are still not applied to the XP storage system.
For details, see "Preview List" (page
The button applies the SIz operations displayed in the Preview List to the XP storage
system. If the specified operations complete successfully, the Preview List will be cleared.
If an error occurs during an operation, the failed operation will remain in the Preview
List with an error icon (
list of SIz error codes, see the HP StorageWorks XP24000/XP20000 Remote Web
Console Error Codes.
Cancels all the operations set in the Preview List.
Figure 23 (page 55)) displays the information for volumes/pairs that can be
63).
"Volume List" (page 54).
57).
) displayed on the left of the operation name. For the entire
"Display Filter Dialog Box"