Cquery - HP StorageWorks XP24000 User Manual

Table 47 Contents that Display when Issuing the CQUERY or the QUERY Command on SIz Pairs
DEVICE
LEVEL
STATE
PATH STATUS
CRIT
CGRPLB
PRIMARY-SSID
PRIMARY-CCA
PRIMARY-LSS
PRIMARY-SERIAL
SECONDARY-SSID
SECONDARY-CCA
SECONDARY-LSS
SECONDARY-SERIAL
PATHS
SAID DEST STATUS
DESCRIPTION
PERCENT OF COPY COMPLETE
SUBSYSTEM
WWN
LIC LEVEL
1 When the MCU-RCU path for TCz is created on the CU where the SIz pair is created, the information about the
MCU-RCU path will be displayed. For detailed information about the MCU-RCU path, see the HP StorageWorks
XP24000/XP20000 Continuous Access Software User's Guide.

CQUERY

Table 48 (page 107)
you see the status of SIz pairs.
106 Performing ShadowImage for Mainframe Pair Operations Using PPRC
Item
Device number of the volume on which the CQUERY command is issued.
PRIMARY indicates that the volume is an S-VOL.
SECONDARY indicates that the volume is a T-VOL.
Pair status.
Since this item is invalid for SIz pairs, ACTIVE is always displayed.
Since this item is invalid for SIz pairs, NO is always displayed.
Since this item is invalid for SIz pairs, NO is always displayed.
SSID of the CU where the S-VOL belongs.
LDEV number of the S-VOL.
CU number of the S-VOL.
Serial number of the S-VOL.
SSID of the CU where the T-VOL belongs.
LDEV number of the T-VOL.
CU number of the T-VOL.
Serial number of the T-VOL. If you perform the CQUERY TSO command for the
T-VOL, the following information is displayed as well as the serial number of
the T-VOL.
00ab000nnnnn
a:
S: This pair is defined as a CTG.
0: Other than listed above.
b:
@: This pair was split by using the At-Time Split function.
0: Other than listed above.
nnnnn: Serial number of the T-VOL.
Since this item is invalid for SIz pairs, 1 is always displayed.
Since this item is invalid for SIz pairs, FFFF FFFF is always displayed.
Since this item is invalid for SIz pairs, PATH ESTABLISH is always displayed.
Since this item is invalid for SIz pairs, 100% is always displayed.
Since this item is invalid for SIz pairs, the content of this item is also invalid.
Since this item is invalid for SIz pairs, the content of this item is also invalid.
Since this item is invalid for SIz pairs, the content of this item is also invalid.
lists and describes the CQUERY command parameters that can be used when
Content
1
1
1
1