Query - HP StorageWorks XP24000 User Manual

Table 48 CQUERY Command Parameters
Parameter
DEVN
Figure 48 (page 107)
Figure 48 CQUERY Command
14.27.58 JOB04573
14.27.58 JOB04573
220
220
220
220
220
220
220
220
220
220
220
220
220
220
220
220
220
220
220
14.27.59 JOB04573
When a command is issued to the target volume (T-VOL) in a CTG, the serial number of the
SECONDARY is displayed in the last part of the following five-part format.
00
00: Indicates the serial number of SECONDARY.
S indicates that the volume belongs to a CTG.
@ indicates a split using the At-Time Split operation with the ATSPLIT command.
000: Indicates that the pair belongs to a CTG.
30158 indicates the SECONDARY serial number.

QUERY

Table 49 (page 107)
you see the status of SIz pairs.
Table 49 QUERY Command Parameters
Parameter
DDNAME,
SYSNAME, or
UNITADDRESS
Figure 49 (page 108)
Device number.
shows an example of the CQUERY command.
ANTP8802I CQUERY
ANTP0090I CQUERY FORMATTED LVL 4
VOLUME REPORT
************** PPRC REMOTE COPY CQUERY - VOLUME ********************
*
*
*DEVICE LEVEL
*------ ---------
* 6400 PRIMARY..
* CRIT(NO).......
* INCRES(NO).
* PATHS SAID DEST STATUS: DESCRIPTION
* ----- --------- ------
* 1 FFFF FFFF
* ---- ----
* ---- ----
* ---- ----
* SUBSYSTEM
* ----------- ----------------
* PRIMARY.... 0000000000000000
********************************************************************
ANTP0001I CQUERY COMMAND COMPLETED FOR DEVICE 6400. COMPLETION CODE: 00
Belongs to CTG Split using At-Time Split
operation
S @
lists and describes the QUERY command parameters that can be used when
DDNAME = dname = JCL statement identifying
the volume.
SYSNAME = sysxxx = SYSNAME in the
ASSGN system control statement.
UNITADDRESS = ccuu = device number.
shows an example of the QUERY command.
DEVN(6400)
220
STATE PATH STATUS
---------- ----------- ---------
DUPLEX.... ACTIVE..
CGRPLB(NO). 000000063515 000000063515*
-------------------
01 PATH ESTABLISHED...
00 NO PATH............
00 NO PATH............
00 NO PATH............
WWNN
000
Value
Displaying Pair Status Using PPRC Commands 107
Value
(PRIMARY) (SECONDARY) *
SSID CCA LSS SSID CCA LSS*
SERIAL# SERIAL#
---------
2700 00 00 2700 01 00 *
LIC LEVEL
-----------
80.9.6.255
SECONDARY serial number
30158
Description
You should specify only one parameter of the
three parameters. The italic part on the left
means that it is the arbitrary name. For
example, dname means the arbitrary unique
name of the JCL statement which identifies the
volume.
*
*
*
*
*
*
*
*
*
*
*
*