Removing The Locking Pin; Supplying Power To The Efx524 - Precor EFX 524 Owner's Manual

C O M M E R C
Diagram 22 EFX Locking pin.
Locking pin
Storage location

REMOVING THE LOCKING PIN

CAUTION: Do not allow children on the EFX. Be aware that injuries can
occur from the roller arm. Always use the locking pin to secure the roller
arm when the EFX is not in use.
The locking pin secures the roller arm and keeps it from traveling up or down the
ramp. Pull firmly on the pin to slide it out of the ramp. A lanyard is attached to the
locking pin and ramp. Refer to Diagram 22.
Store the locking pin underneath the ramp once it is removed from the roller arm.
See inset in Diagram 22.

SUPPLYING POWER TO THE EFX524

The EFX does not require an electrical power connection. It has an internal battery
that is recharged every time a user works out for a reasonable period of time. A
pedaling speed above 40 strides per minute must be maintained for several seconds
before the Precor banner appears on the display. Once the banner appears, the user
can press QuickStart or Enter to begin working out. For more information, refer to
page 36, Exercising on the EFX .
I A L P R O D U C T S D I V I S I O N
page 23