Circuit Operation (Base Unit); Dsp (Digital Speech/Signal Processing: Ic501) - Panasonic KX-TG2359BXB Service Manual

Dual handset digital cordless answering system

Table of Contents

KX-TG2359BXB

17 CIRCUIT OPERATION (Base Unit)

General Description:

(DSP, Flash Memory) is a digital speech/signal processing system that implements all the functions of speech compression,

record and playback, and memory management required in a digital telephone answering machine.

The DSP system is fully controlled by a host processor DSP. The host processor provides activation and control of all that

functions as follows.

17.1.1. Function

· Voice Message Recording/Play back

The DSP system use a proprietary speech compression technique to record and store voice message in FLASH MEMORY.

An error correction algorithm is used to enable playback of these messages from the FLASH MEMORY.

· DTMF Detection/Generator

The DTMF detection is implemented by the DSP system in software. The DTMF detection is performed during Record, Play

back, and Line Monitoring modes of operation.

When the DTMF data from the Handset is received, the DTMF signal is output.

· Synthesized Voice (Pre-recorded message)

The DSP implements synthesized Voice, utilizing the built in speech detector and an FLASH MEMORY, which stored the

vocabulary.

· Caller ID and Call Waiting CID demodulation

The DSP implements monitor and demodulate the FSK signals that provide CID information from the Central Office.

· Analog Switching

The voice signal from Handset is transmitted to the speaker or the voice signal from Digital TAM System is transmitted to the

Telephone line, etc. They are determined by the signal path route operation of voice signal.

· Block Interface Circuit

RF unit, LED, Key scan, Speaker, Microphone, Telephone line, LCD.

Table of Contents