TRENDnet TEW-638APB Quick Installation Manual page 7

Hide thumbs Also See for TEW-638APB:

14. Select the desired Wireless Mode and then

click Next.

15. Select a Security Mode and then click Next.

Note:

1. To protect your network from any unauthorized access it is recommended to enable

wireless encryption.

2. The example below is for WPA2-PSK (AES) security. If you select WPA-PSK or

WPA2-PSK, make sure your wireless adapters support WPA or WPA2. If your

wireless adapters do not support WPA or WPA2, then select WEP.

3. WEP encryption only supports 802.11b/g speed of up to 54Mbps.

4. Once encryption is enabled on the router, each wireless computer and device must

be configured with the same encryption key.

16. Select the desired WPA mode, enter

characters for your Pre-Shared key and then

click Next. For WPA-PSK or WPA2-PSK, the

Pre-Shared Key must be between 8 and 63

ASCII or 64 HEX characters. Make sure to

copy down the Pre-Shared Key. You will need

the Pre-Shared Key when you configure your

wireless adapter(s).