Installing The Printing System (Option) - Olivetti d-Copia 300 Service Manual

2FD/2FF/2FG
1-3-9

Installing the Printing System (option)

Procedure
1. Remove 2 screws and take off the cover.
2. Push the printing system all the way in along
the rails, and fasten it with 2 screws.
Install the (optional) network printer board.
3. Remove 2 screws and take off the cover.
4. Push the network printer board all the way in
along the rails, and fasten it with 2 screws.
1-3-34
Screws
Screws
Screws
Cover
Cover
Figure 1-3-72
Printing system
Figure 1-3-73
Screws
Netwark
printer
board
Figure 1-3-74