Sharp HSDPA WX-T930 User Manual page 156

Sending All Data
(M 12-2-2)
→
"Connectivity" "Infrared"
1.
Enter your handset code.
The default handset code is "9999". For details on
changing the handset code, see "Changing the
Handset Code" on page 137.
2.
Select the desired data to send.
3.
Enter the authorisation code.
Mass Storage (M 12-3)
You can set the phone to connect to a PC via Mass
Storage mode.
→
"Connectivity" "Mass Storage"
1.
Select "Yes".
Note
• Activating Mass Storage mode also activates offline
mode.
• Mass Storage is not available when the battery is low,
a Java™ application is paused, Music Player is
active, or a memory card is not inserted in your phone.
→
"Send All"
USB Charge (M 12-4)
You can set the phone to charge via USB, connected to
a PC.
→
"Connectivity" "USB Charge"
1.
Select "Enable" or "Disable".
Card Settings (M 12-5)
Formatting Memory Card
→
"Connectivity" "Card Settings"
1.
Enter your handset code.
The default handset code is "9999". For details on
changing the handset code, see "Changing the
Handset Code" on page 137.
2.
Select "Yes" to start formatting.
(M 12-5-2)
→
"Format Card"
Connectivity 155