Sharp HSDPA WX-T930 User Manual page 104

To Set the Blinking Operation
This setting enables the backlight to be controlled by
the application. If set to "Off", the backlight cannot be
turned on from the application.
→
"Java™" "Java™ Settings"
"Blink"
1.
Select "On" or "Off".
Vibration (M 1-2-3)
When vibration is set in the application, you can choose
whether the operation is enabled or disabled.
→
"Java™" "Java™ Settings"
1.
Select "On" or "Off".
Calls & Alarms
(M 1-2-4)
The priority of incoming calls, alarms and Bluetooth
connection while an application is operating can be set.
→
"Java™" "Java™ Settings"
1.
Select "Voice Call", "Video Calling", "Incoming
Message", "Alarm" or "Push Request".
→ →
"Backlight"
→
"Vibration"
→
"Calls & Alarms"
2.
Select the desired method.
• "Call Priority", "Message Priority", "Alarm
Priority" or "Request Priority":
The application is suspended automatically, and
you can receive a call or a message, the alarm
will sound or Bluetooth connection will start.
After finishing the call or receiving the message,
or when the alarm or Bluetooth connection ends,
the suspend indicator (
letting you know there is a suspended
application.
• "Call Notice", "Message Notice", "Alarm
Notice" or "Request Notice":
The information is displayed on the first line of
the screen while the application continues. If you
press D, the application will be suspended, and
you can receive the call. After finishing the call
or receiving the message, the suspend indicator
( ) will be displayed letting you know there is a
suspended application.
) will be displayed
Java™ 103