Sharp HSDPA WX-T930 User Manual page 122

Scanner
(M 3-d-d-4)
With the built-in digital camera, you can read barcodes
in QR code format. The scanned data can be saved as a
Phonebook entry, URL, Email address and text.
Note
• When scanning does not take place, it may be due to
one of the following reasons: type or size of barcode,
scratches, dirt, damage, print quality, light
reflection, etc.
Reading Barcodes
→
"Organiser" "Tools 3" tab
Barcode"
1.
Display the barcode using the camera.
2.
Press [Scan].
3.
Press [Options] and select the desired option.
The options vary depending on the scanned data.
"Save":
"Send Message":
"Save to Notepad":
"Copy":
→ →
"Scanner" "Scan
The result is saved.
The result is sent as SMS or
MMS.
The result is saved as text.
The result is copied.
To Set the Focus Mode
→
"Organiser" "Tools 3" tab
Barcode"
1.
Press [Options] and select "Focus".
2.
Select "Auto Focus", "Macro" or "Manual Focus".
To Use Continuous Scanning
→
"Organiser" "Tools 3" tab
Barcode"
1.
In scanning mode, press [Options] and select
"Continuous Scan".
2.
Select "On" or "Off".
To Set the Mobile Light
→
"Organiser" "Tools 3" tab
Barcode"
1.
Press [Options] and select "Mobile Light".
2.
Select "On" or "Off".
To Adjust the Exposure
→
"Organiser" "Tools 3" tab
Barcode"
1.
Press [Options] and select "Exposure".
2.
Select the desired exposure.
→ →
"Scanner" "Scan
→ →
"Scanner" "Scan
→ →
"Scanner" "Scan
→ →
"Scanner" "Scan
Organiser 121