Sharp HSDPA WX-T930 User Manual page 147

To Select a Network Automatically
Each time the power is turned on, your phone always
tries to connect to the preferred network.
If your phone is not connected to the network, you can
perform the following immediately to establish the
preferred network connection.
→
"Settings" "Network Settings" tab
→
Settings" "Select Network"
To Select the Network Manually
→
"Settings" "Network Settings" tab
→
Settings" "Select Network"
1.
Select the desired network.
To Edit the Preferred List
→
"Settings" "Network Settings" tab
→
Settings" "Select Network"
1.
Select the name of the network you wish to edit.
2.
Select "Insert" to insert over the selected position,
"Add to End" to insert at the end or "Delete" to
delete.
146 Settings
→
"Network
→
"Automatic"
→
"Network
→
"Manual"
→
"Network
→
"Set Preferred"
To Add a New Network
→
"Settings" "Network Settings" tab
→
Settings" "Select Network"
Network"
If there are no entries, press B and go to step 2.
If there is an entry, press B and perform the following
steps.
1.
Select "Add".
2.
Enter the country code (up to 3 digits).
3.
Enter the network code (up to 3 digits).
4.
Enter a new network name (up to 25 characters).
5.
Select the desired network type.
6.
Enter either 2G (GSM) or 3G for the network type.
Showing the Network Information
(M 9-d-d-1-3)
→
"Settings" "Network Settings" tab
→
Settings" "Network Information"
Information about the operator is displayed.
→
"Network
→
"Add New
→
"Network