Clutch - Honda CG125 Fan Owner's Manual

20
4. Apply the brake several times and check for free
wheel rotation after the brake pedal is released.
• Make sure the cut-out on the adjusting nut is
seated on the brake arm pin (3) after making final
free play adjustment.
• If proper adjustment cannot be obtained by this
method, see your Honda dealer.
(3)
Other checks
Make sure the brake rod, brake arm, spring and
fasteners are in good condition.
(3) Brake arm pin

Clutch

Clutch adjustment may be required if the motorcycle
stalls when shifting into gear or tends to creep; or if
the clutch slips, causing acceleration to lag behind
engine speed.
Minor adjustments can be made with the clutch cable
adjuster (4) at the lever (1).
Normal clutch lever free play is:
10 – 20 mm (0.4 – 0.8 in)
(1)
1. Pull back the rubber dust cover (2). Loosen the lock
nut (3) and turn the adjuster (4). Tighten the lock
nut (3) and check the adjustment.
2. If the adjuster is threaded out near its limit or the
correct free play cannot be obtained using the cable
adjuster (4), loosen the lock nut (3) and turn in the
cable adjuster (4) completely. Tighten the lock nut
(3) and install the rubber dust cover.
Owner´s Manual
(1) Clutch lever