Owner´s Manual
Idle Speed
(Refer to the Safety Precautions on page 39.)
The engine must be at normal operating temperature
for accurate idle speed adjustment. 10 minutes of
stop-and-go riding is sufficient.
Do not attempt to compensate for faults in other
systems by adjusting idle speed. See your Honda
dealer for regularly scheduled carburetor adjustments.
1. Warm up the engine, shift to neutral, and place the
motorcycle on its side stand.
2. Connect a tachometer to the engine.
3. Adjust idle speed with the throttle stop screw (1).
Idle speed (in neutral):
1,400 ± 100 min
–1
(A)
(B)
(1)
(rpm)
(1) Throttle stop screw
(A) Increase
(B) Decrease
Air Cleaner
(Refer to the Safety Precautions on page 39.)
The air cleaner should be serviced at regular intervals
(page 41). Service more frequently when riding in
unusually wet or dusty areas.
1. Remove the right side cover (page 29).
2. Remove the right storage compartment cover (page 31).
(2)
(1) Air cleaner housing
cover
(1)
(2) Screws
49