Heat & Glo 8000CF-OAK-IPI Owner's Manual page 39

2
Figure 12.10
STEP 5:
(SRV2057-723): Mate the top of log 4 with the
right metal tab on log 3. The bottom of log 4 should touch
the inside face of the right grate tine.
5
2
Figure 12.12
STEP 7:
(SRV2057-725): Place log 6 on log 2 as shown. The left end of log 6 should touch the upper knot of log 2. The
right end of log 6 should rest on the grate bar, centered between tine 4 and 5. NOTE: The front faces (C) of log 6 and 2
should be on the same plane. This is key in avoiding fl ame impingement.
Figure 12.14
NOTE:
Finished top view.
3
1
3
C
6
C
Heat & Glo • 8000CF-OAK-IPI • 2059-900 Rev. o • 12/07
Figure 12.11
STEP 6:
(SRV2057-724): Notch in left end of Log 5 will
interlock with front left corner of grate. Rest right end of
log so that it engages tab on log 3. Log 2 may need to
shift to right slightly.
5
1
Figure 12.13
5
3
2
3
6
2
4
1
4
1
39