Advertisement
CHECK_SUM
This function calculates a 32-bit Checksum of the code image. A flag will be
returned to indicate if the calculated checksum matches a checksum stored in a
known location at power up. The checksum will be for the whole of the software
image, which does not necessarily mean the whole of the flash device.
Note also that the checksum is 32 bits long, however only the least significant 16
bits (2 bytes) will be returned in the response.
Function Id Number
Mode
Parameter
Sum
Flag
DROP
This function will release an active call.
Function Id Number
Mode
GAIN
This allows the receiver AGC to be disabled and the in message values (see
below) to be used instead.
Function Id Number
Mode
Parameter
Function Id Number
Mode
pmb2410 Gain
CSP1089 Gain
Absolute Gain
LNA set
12
Suspend
Range
0 - 65535
0 - FAIL, 1 - PASS
16
Non Suspend
23
Suspend
Range
23
0 - Fixed
1 - Automatic
2 - Absolute
Value of bit field settings for
turning on individual gain stages
(only valid if mode field is set to 0)
0 -9 (only valid if mode field set to
0)
0 -70 (gain in dB - only valid if
mode field set to 2)
0 = LNA off
1 = LNA on
Purpose/Result
Checksum
Indicates the result
Purpose/Result
Advertisement
