Beep On/Off (Activates And Deactivates The Beep); Making Coffee; Selecting The Coffee Taste; Selecting The Quantity Of Coffee In The Cup - DeLonghi ESAM6620 Instructions For Use Manual

ESC symbol flashing on the display) to exit
programming mode or
parameters.
The appliance is now reset to the default settings
Beep ON/OFF (activates and deactivates the
beep)
P button, then press the
button (corresponding to the
flashing on the display) repeatedly until the
button (corresponding to the
SET symbol flashing on the display) and the
OK button to turn the beep off;
P button (corresponding to the
ESC symbol flashing on the display) to exit
programming mode or
parameters.

MAKING COFFEE

Selecting the coffee taste

The appliance is preset to make coffee with a
standard taste.
You can choose between 5 different coffee
tastes:
To change the taste, press the
(fig. 2) repeatedly until the required taste is
displayed.

Selecting the quantity of coffee in the cup

The appliance is set by default to automatically
make the following quantities of coffee:
- short coffee when the
- long coffee when the
- two short coffees when the
pressed;
- two long coffees when the
pressed.
To change the quantity of coffee the appliance
delivers automatically into the cup, proceed as
to change other
symbol
to change other
button
button is pressed;
button is pressed;
button is
button is
described below.
- press the button corresponding to the
quantity you want to change for at least
commences;
- when the coffee in the cup reaches the
required level, press the same button again
to memorise the new amount. This is
confirmed by two beeps.
The appliance is now reprogrammed with the new
Please note:
all four coffee buttons can be customised.

Adjusting the coffee grinder

The coffee grinder is preset in the factory to
make coffee correctly and should not require
adjusting initially.
Important!
The grinding adjustment knob must only be
turned when the coffee grinder is in operation.
For slower coffee delivery and a creamier coffee,
coffee).
For faster delivery (not a drop at a time), turn one
These adjustments will only be evident after at
least 2 cups of coffee have been delivered.
If delivery is still too fast or too slow, repeat the
correction procedure.

Manual rinsing

For a hotter coffee, before delivery rinse the
appliance through by pressing the
Hot water flows out of the coffee spouts and
heats the internal circuit of the machine so that
the coffee delivered will be hotter.
13
However, if after making
the first few coffees
you find that delivery
is either too fast or too
slow (a drop at a time),
this can be corrected by
adjusting the grinding
adjustment knob (fig.
7).
: button.