Checking Drawer Alignment; Adjusting Drawer Alignment - U-Line Echelon 2275DWRWS Wine Captain Installation Manual

5 Adjust Drawers

Checking Drawer Alignment

The unit's drawers are aligned at the factory before
shipment. However, their alignment could have been
disturbed during shipment.
Aligned
Top-to-Bottom
Figure 8
See Figure 8. Check each drawer to confirm that it is
aligned:
• Side-to-Side — When viewed from the top, the
drawer front should be square with the sides of the
cabinet.
• Front-to-Back — When viewed from the side, the
drawer front should be straight with the cabinet's
sides, not cocked forward or back.
• Top-to-Bottom — When viewed from the front, the
drawer should be level horizontally.
If either drawer is not aligned, carefully follow
instructions to remove that drawer, make the necessary
adjustment and re-install the drawer.
02/2007
2275DWRWS/2275DWRWOL —
Drawer Model Wine Captain
Aligned
Front-to-Back
Aligned
Side-to-Side
ULIN_0001a_A
®

Adjusting Drawer Alignment

SHOCK HAZARD — The unit must be unplugged
from the wall outlet during drawer removal,
adjustment and re-installation.
Drawer Removal
Mounting
Screw
Figure 9
1. Confirm that the unit is unplugged from wall outlet.
2. Unplug the drawer's connection wiring (top drawer
only).
3. Remove the mounting screws (see Figure 9).
4. Pull the drawer completely out of the unit.
Use care when handling the drawer. Drawer edges,
drawer rail and the unit's slide may be sharp.
IMPORTANT
Drawer adjustments are made by moving the slide that
carries the drawer's rail. Minor adjustments may be made
by loosening one of the slide's mounting screws, adjusting
the slide and retightening the screw. Severe adjustments
may be made by removing the slides' mounting screws,
drilling new mounting holes and remounting the slide.
9
WARNING
ULIN_0001b_A
CAUTION
www.U-LineService.com