Setting Up A Second Listening Zone; What Is A Zone; What Do 1Need For Setting Up A Second Zone; How Do 1Set Up A Speaker System In Second Zone - Bose Lifestyle DVD Installation Manual

Lifestyle dvd home entertainment systems
Hide thumbs Also See for Lifestyle DVD:
Table of Contents

Advertisement

Setting
up a second
listening
zone
Your Lifestyle ® home entertainment
system can direct sound from one or two sound sources
(such as CD, AM/FM tuner, TAPE, or AUX) to two different listening zones at the same time.
What
is a zone?
Each listening area, whether a room or a group of rooms (including outdoor areas), is called a
zone. Your primary listening area is set up as zone 1.
What
do I need
for setting
up a second
zone?
• A Bose ®powered speaker system that is compatible with your home entertainment
system.
An existing stereo system can also be connected (special adapter required).
• The appropriate Lifestyle ®system cable to connect the zone 2 speaker system to the
SPEAKER ZONES 2 connector on the rear panel of the media center.
• A second Lifestyle ®system remote control to operate the zone 2 sound.
See your dealer or contact Bose for information on obtaining additional powered speakers,
remote controls, cables, and adapters for connecting
additional equipment.
How
do I set
up a speaker
system
M a second
zone?
1.
Set up a speaker system in zone 2.
2.
Connect the audio input cable from the zone 2 system to the SPEAKER ZONE 2 output
on the rear panel of the media center.
3.
When power is connected and you are ready to set up your second remote control, see
"Setting up a second listening zone" in your Lifestyle ®system operating guide.
Figure
21
Media center-to-Zone 2
connections
Zone 2 output connection
Zone 2 stereo adapter kit cable
(Mini-DIN connector is marked "FIX".)
Zone 2 speaker connections
m
Control
Left
channel
Right channel
Note: Before using your zone
2 speakers, you may need to
change the "Zone 2 Protocol"
setting for the zone 2 speak-
ers you are using. See
"Changing the System Set-
up" in your operating guide.
Note: For zone 2, use only cables that have a mini-DIN connector marked "FIX". Cables
marked "VAR" should not be used.
AM 259777 Rev.O0 PDF
August 14, 2001
23

Advertisement

Table of Contents
loading

Table of Contents