York inspiration cross trainer Owner's Manual page 10

7. Attach the front handle bar
1. Attach the front handle bar to the front post using
screw, spring washer and flat washer as shown
9. Attach the console
1. Insert 2 x AA size 1.5V batteries into the console
2. Secure onto the bracket using screws as show
- (screw are located in the back of the console)
3. Connect the computer cabel into the right hand
socket on the back of the console
4. Connect the hand pulse sensor wire plug into the
left hand socket on the back of console
Final Checks
Your cross trainer is now assembled. Please make the following final checks before you use it for the first time.
•
Make sure all screws / bolts are tightened
•
Make sure you have positioned it on a flat, level surface
10
10
11
8
26
FIXINGS: FIXINGS:
Part
No.
8
x 2
Part
No.
11
x 2
Part
No.
10
x 2
FIXINGS: FIXINGS:
Part
No.
26
x 2