Indoor Unit Installation Drawings - Daikin FVXG25K2V1B Installation Manual

Indoor Unit Installation Drawings

• Be sure to install the indoor unit in accordance with the installation instructions below for any installation pattern.
50mm or more
from wall
Air filters (upper)
B Titanium apatite photocatalytic
air-purifying filter (2)
Filter frame
Tab
Claw
English
Install the indoor unit where there is no obstacle above the unit.
Obstacles affect the air current distribution, and an adequate heating or
cooling effect cannot be obtained.
Air filters (lower)
Titanium apatite
photocatalytic
air-purifying filter
Air filter
Screws (field supply: M4 × 25L)
150mm or more
from wall
70 to 120mm from floor
If these restrictions on installation are not observed,
the room temperature distribution may be affected.
E Wireless remote controller
Before screwing the
remote controller
holder to the wall,
make sure that
control signals are
properly received
by indoor unit.
F Remote controller
Fixing screws for
remote controller holder
(field supply: M3 × 20L)
A Mounting plate
holder
8