Half Concealed Installation
Only items peculiar to this installation method are given here. See Exposed Installation for additional instructions.
1.
Opening a wall hole for half concealed installation
•
Drill a wall hole of the size shown in the illustration.
2.
Installation of supplemental plate for attaching the unit
•
The rear of the unit can be fi xed with screws at the supplemental plate shown in the illustration.
Be sure to install the supplemental plate in accordance with the depth of the inner wall.
Fix the supplemental plate to the wall firmly
so that it can bear the heavy load of the unit.
Supplemental plate
(field supply)
English
Open size
Opening hole
Floor
(unit: mm)
865-885
Opening hole
Floor
(unit: mm)
85
Wall
Supplemental plate
(field supply)
Floor
20