Controls, Indicators And Connectors - Crown CP660 Reference Manual

CP660 Six Channel Amplifier
2 Controls, Indicators and
Connectors
Signal Indicators
Six green signal indicators show the presence of signal
at the corresponding channel's loudspeaker connec-
tion.
Clip Indicators
Six yellow clip indicators are provided. These will light
when distortion is audible on the amplifier output of the
corresponding channel
.
Reference Manual
Fig. 2.1 Front Controls, Indicators and Connectors
Temp Indicator
Typically unlit to signal normal operating conditions.
This red LED will turn on when the temperature of the
amplifier gets too high and the fan is in full-speed op-
eration mode. If the maximum operating temperature
is exceeded, this light remains on while the amplifier
cools down.
Power Indicator
The green power indicator turns on when the CP660
has been turned on and has power.
Power Switch
The power switch is located on the front panel so you
can easily turn the amplifier on or off. When the switch
is depressed left, the amp is off. If you ever need to
make any wiring or installation changes, remember to
also disconnect the power cord.
Page 7