Modifying Management Server Network Settings; Selecting A Proxy Server - HP 800 User Manual

CAUTION:
WARNING:
NOTE:

Modifying Management Server Network Settings

Back up your system immediately after changing the MS or ES IP address. If
you do not back up with the new IP address, and later restore your system, it
will restore the previous IP address which can show an ES error condition
and cause authentication problems. See "Maintenance" on page 3-91 for
instructions on backing up and restoring your system.
To modify Management server network settings:
NAC 800 Home window>>System configuration>>Management server
Changing the Management server network settings will cause the network
interface to restart.
Click edit network settings in the Network settings area.
1.
2. Enter the values you want to modify:
• Enter a new name in the Host name text field. For example,
garp.mycompany.com
Select names that are short, easy to remember, have no spaces or under-
scores, and the first and last character cannot be a dash (-).
• Enter a new address in the IP address text field. For example,
192.168.153.35
Enter a new netmask in the Network mask text field. For example,
•
255.255.255.0
Enter a new gateway in the Gateway IP address text field. For example
•
192.168.153.2
• Enter one or more DNS resolver IP addresses, separated by commas,
semicolons, or spaces in the DNS IP addresses text box. For example:
10.0.16.100,10.0.1.1
Click ok.
3.

Selecting a Proxy Server

Connecting to the Internet is necessary for updating tests, validating license
keys, and sending support packages.
System Configuration
Management Server
3-23