Defining Non-Supported Os Access Settings; Setting Test Properties; Selecting Action Taken - HP 800 User Manual

NOTE:

Defining Non-supported OS Access Settings

To define what actions to take for endpoints with non-supported operating
systems:
Main NAC 800 window>>NAC policies>>Select a NAC Policy>>Basic
settings area
In the Operating systems area, select the check box beside any operating
1.
system that you will allow access without being tested.
Click ok.
2.

Setting Test Properties

Test properties are specific to the particular test. Select the properties you
want applied. Tests are explained in detail in "Tests Help" on page A-1.
To set the test properties for a specific test:
NAC 800 Home window>>NAC policies>>Select a NAC Policy>>Tests menu
option
1. Click on the name of test to display the test's options.
Click a test name to display the options; select the test check box to enable
the test for the policy you are modifying.
2. Select the test failure actions to apply for this test:
Send email notification
•
Quarantine access
•
3. Select any test properties if applicable.
4. Click ok.

Selecting Action Taken

Actions can be passive (send an email), active (quarantine) or a combination
of both.
To select the action to take:
NAC Policies
NAC Policy Tasks
6-15