Editing Enforcement Clusters - HP 800 User Manual

TIP:
You can also access the quarantine area Enforcement cluster by clicking
Quarantining in the System configuration window (see "Quarantining" on
page 3-49 for more information).
3. The following cluster settings take on default values set from the System
configuration window. To set up operating parameters that differ from
those default settings, select the menu item of the settings you want to
change, then select the For this cluster, override the default settings check
box, and make the desired changes. Refer to the sections listed below to
set up the default values, or for more information on the specific settings.
Testing methods – See "Testing Methods" on page 3-95
•
• Accessible services – See "Accessible Services" on page 3-98
Exceptions – See "Exceptions" on page 3-100
•
Notifications – See "Notifications" on page 3-102
•
• End-user screens – See "End-user Screens" on page 3-104
Agentless credentials – See "Agentless Credentials" on page 3-107
•
Logging – See "Logging" on page 3-111
•
• Advanced – See "Advanced Settings" on page 3-114

Editing Enforcement Clusters

To edit the Enforcement clusters settings:
NAC 800 Home window>>System configuration>>Enforcement clusters &
servers
1. Click the cluster you want to edit. The Enforcement cluster window
appears, as shown in Figure 3-3 on page 3-11.
2. Click a menu option to access the cluster settings:
• General
• Quarantining
Testing methods
•
Accessible services
•
• Exceptions
Notifications
•
End-user screens
•
• Agentless credentials
Logging
•
System Configuration
Enforcement Clusters
3-9