Nac Policy Hierarchy; Setting Retest Time; Setting Connection Time - HP 800 User Manual

NAC Policies
NAC Policy Tasks
TIP:
TIP:
6-14

NAC Policy Hierarchy

If an endpoint is listed in more than one NAC policy, the order of use is as
alphabetical by name of NAC policy (not including the default NAC policy).

Setting Retest Time

Retest endpoints connected to your network frequently to guard against
potential changes in the remote endpoint configurations.
To set the time to wait before retesting a connected endpoint:
NAC 800 Home window>>NAC policies>>Select a NAC Policy>>Basic
settings menu option
In the Retest frequency area, enter how frequently in minutes, hours, or
1.
days NAC 800 should retest a connected endpoint.
A lower number ensures higher security, but puts more load on the NAC 800
server.
2. Click ok.

Setting Connection Time

Disconnect end-users after a specific amount of time to guard against other
parties accessing the connection while the authenticated end-user has
stepped away from their desk.
To set the time an end-user can be inactive before requiring the end-user to
log in again:
NAC 800 Home window>>NAC policies>>Select a NAC Policy>>Basic
settings menu option
1. In the Inactive endpoints area, enter how long an end-user can be inactive
before they have to log in again.
A lower number ensures higher security.
Click ok.
2.