Yamaha 2010 FX Nytro FX10X Service Manual page 509

Hide thumbs Also See for 2010 FX Nytro FX10X:

Table of Contents

*1: Tighten the cylinder head bolts to 25 Nm (2.5 m•kg, 18 ft•lb) in the proper tightening sequence,

loosen and retighten the cylinder head bolts to 25 Nm (2.5 m•kg, 18 ft•lb) in the proper tightening

sequence, and then tighten the cylinder head bolts further to reach the specified angle 175 ~

185° in the proper tightening sequence.

*2: Tighten the crankcase bolts to 15 Nm (1.5 m•kg, 11 ft•lb) in the proper tightening sequence,

loosen and retighten the crankcase bolts to 15 Nm (1.5 m•kg, 11 ft•lb) in the proper tightening

sequence, and then tighten the crankcase bolts further to reach the specified angle 65 ~ 70° in

the proper tightening sequence.

*3: Tighten the connecting rod nuts to 20 Nm (2.0 m•kg, 14 ft•lb), and then tighten the connecting

rod nuts further to reach the specified angle 115 ~ 125°.

TIGHTENING TORQUE